3 Series E46 M3 (S54) CONVER
Installing inlet camshaft:
Install inlet camshaft in such a way that cams on cylinder 1 point
horizontally inwards.
Inlet side:
Important!
Incorrect removal/installation without a special tool exposes
the camshaft to the risk of preliminary damage or breakage.
Fit special tool 11 4 380 on inlet camshaft and screw into spark
plug threads of cylinders 2 and 5.
Inlet side:
Pretension inlet camshaft by rotating eccentric shaft.
Inlet side:
Important!
Risk of mixing up parts.
Fit inlet side bearing caps so that lug (2) points outwards to
inlet side.
Note:
Bearing caps are secured with adapter sleeves (1).
Check dowel sleeves (1) for damage and correct installation
position.
RA Replacing camshafts (S54)
BMW AG - TIS
16.02.2013 08:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -