3 Series E46 M3 (S54) CONVER
Exhaust side:
Important!
Risk of mixing up parts.
Fit exhaust side bearing caps so that lug (2) points outwards
to exhaust side.
Note:
Bearing caps are secured with adapter sleeves (1).
Check dowel sleeves (1) for damage and correct installation
position.
Exhaust side:
Note:
Bearing caps are marked A2 to A7.
Install bearing caps A2 to A7.
Exhaust side:
Align bearing caps by hand until they are secured by means of
adapter sleeves.
Insert all nuts of bearing caps on exhaust camshaft.
Manually tighten bearing cap nuts and then tighten down from
inside to outside in 1/2 turn increments.
Tightening torque 11 31 1AZ .
Remove special tool 11 4 380 .
Exhaust side:
Important!
Note direction and angle of rotation.
Rotate exhaust camshaft at hexagon from horizontal position
upwards until locating bore (1) in camshaft is vertical.
RA Replacing camshafts (S54)
BMW AG - TIS
16.02.2013 08:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 16 -
