3 Series E46 M3 (S54) CONVER
If the measured valve clearance is outside the stipulated valve
clearance tolerance:
Caution!
It is very easy for the adjustment plates to fall down.
Place a clean cloth underneath the valve to be adjusted.
Seal oil return and vent holes.
Seal opening to timing case cover at first cylinder.
Seal spark plug bores.
Caution!
Do not damage sealing surface for cylinder head cover.
Carefully detach retaining clip (1) from rocker arm shaft.
Caution!
It is very easy for the adjustment plates to fall down.
Carefully slide rocker arm to one side.
Note:
Special tool 11 4 400 is magnetic.
Remove adjustment plates with special tool 11 4 400 .
RA Adjusting valve clearance (S54)
BMW AG - TIS
16.02.2013 08:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
