3 Series E46 M3 (S54) CONVER
Note:
A filter is integrated in the control valve.
In the event of engine damage which suggests that the filter is
contaminated with swarf/chips, it is essential to replace the control
valve.
Replace sealing rings (1) and coat with oil as antiseize agent.
Preassemble control valve in cylinder head.
Check dowel sleeves (1) for damage and correct installation
position.
Replace seal (1).
Important!
Note direction of installation of gasket.
Install gasket (1) in such a way that beading points to
VANOS adjustment unit.
Secure gasket (1) with sealing compound on adapter
sleeves.
Place VANOS adjustment unit on toothed shafts (1).
RA Removing and installing, sealing/replacing VANOS adjustment unit (S54)
BMW AG - TIS
16.02.2013 08:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
