3 Series E46 M3 (S54) CONVER
Withdraw ignition coil.
This removal procedure is applicable to all ignition coils.
Installation:
The lug on the cylinder head (2) must be inserted in the opening
on the underside (1) of the rubber seal.
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Replacing ignition coil (S54)
BMW AG - TIS
16.02.2013 09:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
