3 Series E46 M3 (S54) CONVER
12 31 020
Removing and installing/replacing alternator
(S54)
Note:
Switch off ignition.
Follow instructions for disconnecting and connecting battery.
Disconnect and cover battery negative lead.
Caution!
When working on the oil, coolant or fuel circuit, it is essential
to protect the alternator against contamination. Cover
alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
Remove fan cowl.
Remove alternator drive belt.
Note:
Drain the main flow oil filter in order to prevent an excessive
discharge of oil when the oil cooler lines are disconnected.
This operation is described in the section "BMW engine oil service
incl. supplementary service".
RA Removing and installing/replacing alternator (S54)
BMW AG - TIS
16.02.2013 09:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
