3 Series E46 M3 (S54) CONVER
13 41 500
Replacing idle-speed control valve (S54)
Interrogate fault memory of DME control unit.
Turn off ignition.
Remove intake air manifold.
Release hose clamps (1) and detach hoses from idle-speed
control valve (2).
Unlock plug (3) and detach from idle-speed control valve (2).
Release nuts.
Remove holder (4) together with idle-speed control valve (2).
Installation:
If necessary, install holder (4) with rubber damper on new idle-
speed control valve.
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Replacing idle-speed control valve (S54)
BMW AG - TIS
16.02.2013 09:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -