3 Series E46 M3 (S54) CONVER
Release screw connection of corresponding throttle valve
assembly.
Remove throttle valve assembly.
Installation:
Removal of a throttle valve assembly is described separately from
its installation.
Clean sealing faces (1). Note correct position of adapter
sleeves (2).
Clean sealing face of cylinder head.
Replace O-ring (1) in cylinder head.
RA Removing and installing/sealing a throttle valve assembly (S54)
BMW AG - TIS
16.02.2013 10:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
