3 Series E46 M3 (S54) CONVER
16 12 010
Removing and installing/replacing carbon
canister (M3)
Release screws (1) from rear.
Release screws (1) from front. Remove panel (2).
Unfasten lines (1) ... (3) and detach.
Release screws (4) and remove carbon canister (5) towards
bottom.
Installation:
Press rubber-encased lugs (1) on carbon canister (2) into
mountings (3).
RA Removing and installing/replacing carbon canister (M3)
BMW AG - TIS
16.02.2013 10:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -