3 Series E46 M3 (S54) CONVER
17 21 150
Removing and installing / replacing oil cooler
(S54)
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Remove assembly underguard at front.
Note:
Check engine oil level after completing tasks.
Release screw (1).
Detach oil cooler line (2) from oil cooler.
Catch and dispose of escaping oil.
Installation:
Use new sealing rings.
Release screw connection (1) of oil cooler on radiator.
Remove oil cooler (2) towards rear.
Catch and dispose of escaping oil.
RA Removing and installing / replacing oil cooler (S54)
BMW AG - TIS
16.02.2013 10:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
