3 Series E46 M3 (S54) CONVER
17 22 030
Removing and installing / replacing oil line for
oil cooler (S54)
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Remove assembly underguard at front.
Note:
Check engine oil level after completing tasks.
Release screw (1).
Detach oil cooler line (2) from oil cooler.
Catch and dispose of escaping oil.
Installation:
Use new sealing rings.
Detach plug (1) from control unit for xenon light.
Remove cover (2).
RA Removing and installing / replacing oil line for oil cooler (S54)
BMW AG - TIS
16.02.2013 10:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
