3 Series E46 M3 (S54) CONVER
Note:
Insert special tool 21 2 170 only in area of bores for dowel pins.
Fit special tool 21 2 170 and tighten down at knurled screw (1).
Screw in spindle (1) until diaphragm spring (2) is pretensioned on
stop.
Important!
Handle clutch disk carefully, do not touch surfaces of friction
pads.
Install clutch plate in correct position.
Note designation for "engine side" / "transmission side".
RA Removing and installing or replacing clutch
BMW AG - TIS
16.02.2013 10:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
