3 Series E46 M3 (S54) CONVER
21 53 516
Replacing pressure accumulator for hydraulic
unit (S6S 420G SMG)
Note:
After completing work:
Proceed in accordance with test program,
refer to "Service Functions" in DIS Tester.
Read out fault memory and clear entered faults.
Check fluid level in hydraulic system.
Depressurize hydraulic system.
Disconnect battery, battery positive lead from battery positive
terminal.
Remove intake air manifold.
Disconnect plug (1) of carbon canister.
RA Replacing pressure accumulator for hydraulic unit (S6S 420G SMG)
BMW AG - TIS
16.02.2013 11:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
