3 Series E46 M3 (S54) CONVER
23 00 025
Removing and installing transmission
(S6S 420G)
Special tools required:
•
00 2 030
•
23 0 041
•
23 0 042
Note:
After completion of work, check transmission oil level.
Caution!
A breaking-in inspection including an oil change is required
after 2000 km.
Use only the approved gear oil in this manual transmission.
Failure to comply with this requirement will result in serious
damage to the transmission.
Disconnect battery.
Remove intake air manifold.
Remove heater bulkhead.
Remove fan with fan impeller.
RA Removing and installing transmission (S6S 420G)
BMW AG - TIS
16.02.2013 11:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
