3 Series E46 M3 (S54) CONVER
Installation:
Screw special tool 23 3 012 onto output shaft.
Pull out radial seal with special tool 00 5 010 .
Installation:
Drive in radial seal as far as it will go with special tool
23 2 480 .
Note:
To drive in: use a plastic hammer.
RA Replacing radial seal for output flange (S6S 420G)
BMW AG - TIS
16.02.2013 11:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -