bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Rear Differential (M3)|Page 1352 > < 4 RA Removing And Installing_replacing Rear Differential (M3)
Page 2
background image

Warning!

Danger of injury!

Failure to comply with the following instructions may result
in the vehicle slipping off the lifting platform and critically
injuring other persons.

 

When supporting components, make sure that

the vehicle can no longer be raised or lowered

the vehicle does not lift off the locating plates on the
lifting platform

Warning!

Danger of injury!

To prevent the rear differential from falling down, check and if
necessary correct the positioning of the side bearing caps on
adapters  33 4 426 .

 

Support rear differential with special tool  33 4 420  and
adapters  33 4 426  on side bearing caps.

Unfasten screws.

Release screw (1).

Slowly lower workshop jack and remove rear differential towards
rear.

RA  Removing and installing/replacing rear differential (M3)

BMW AG - TIS

16.02.2013  13:03

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

4 RA Removing And Installing_replacing Rear Differential (M3)|Page 1352 > < 4 RA Removing And Installing_replacing Rear Differential (M3)