3 Series E46 M3 (S54) CONVER
36 12 084
Replacing sealant bottle of M-Mobility system
Special tools required:
•
36 1 080
Note:
This operation describes how to replace the sealant bottle
within the framework of inspection (M-Mobility system
unused).
The control head must also be replaced if the M-Mobility
system has already been used.
Pull off sticker for warning V max (1). Omitted if M-Mobility system
already used.
Lift cover (2) off control head.
Installation:
Replace sticker for warning V max.
Replace shelf-life sticker on housing.
Make sure cover to control head is correctly positioned.
Release control head (1) with special tool 36 1 080 .
Installation:
Tighten down control head with special tool 36 1 080 .
Tightening torque 36 12 3AZ.
RA Replacing sealant bottle of M-Mobility system
BMW AG - TIS
16.02.2013 14:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
