3 Series E46 M3 (S54) CONVER
View from luggage compartment:
Open weld joints in areas (1).
Preparation of new part:
Open welding spots in areas (1) on new rear axle carrier part.
Remove carrier plate (2).
Drill all connection points on carrier plate (2) for plug welding.
Open all weld joints in areas (3) and drill for plug welding.
Drill areas (1) for plug welding.
Take off holder (1).
Clean all connecting faces on new part and body and coat with
welding primer.
Adjust rear axle carrier to fit with straightening attachment.
Installation:
Reattach removed anti-drumming linings.
Seal all seams on body.
RA Replacing rear axle carrier
BMW AG - TIS
16.02.2013 15:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -