3 Series E46 M3 (S54) CONVER
51 11 000
Removing and installing complete front
bumper (M3, M3 CSL)
Release screws (1) and expansion rivet (2) on left and right.
Installation:
If necessary, replace faulty expansion rivet.
Note:
For removal, lever out catch (3).
Only on right side:
Release screw (1) for washer reservoir.
Left side:
Release screw (1) on left.
Lever out wheel arch trim (2) at side.
Lever out cap (1).
Unlock plug connections (2) and (3) and disconnect.
Remove cover (4).
RA Removing and installing complete front bumper (M3, M3 CSL)
BMW AG - TIS
16.02.2013 16:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
