3 Series E46 M3 (S54) CONVER
Right side:
Release screws (1) and remove cover (2).
Release screws (1) on impact absorber on left/right.
Tightening torque, 51 11 2AZ
.
M3 CSL only:
Release screws (1) on impact absorber on left/right.
Tightening torque, 51 11 2AZ
.
Pull back bumper on left a little.
Disconnect plug connection (1) on left.
RA Removing and installing complete front bumper (M3, M3 CSL)
BMW AG - TIS
16.02.2013 16:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
