3 Series E46 M3 (S54) CONVER
51 25 028
Removing and installing/replacing drive unit
for convertible top compartment lid locks
Remove rear seat.
Unlock convertible top compartment lid locks.
If necessary, carry out emergency unlocking,
refer to Owner's handbook.
Unlock protective cap (1) at lugs (2).
Note:
Do not move Bowden cables (1) and (2).
Lift Bowden cables (1) and (2) out of housing (3).
Lift Bowden cable cores (4) and (6) out of mount (5).
Installation:
Bowden cable (1) is for left convertible top compartment lid lock.
Disconnect plug connection (1).
Release screws (2) and remove drive unit (3).
Installation:
Clip in emergency crank (4) again after installation.
Check function.
RA Removing and installing/replacing drive unit for convertible top compartment lid
BMW AG - TIS
16.02.2013 17:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
