3 Series E46 M3 (S54) CONVER
Retraction depth (B):
Slacken screws (1) with Torx T30.
Slacken nut with special tool 41 6 120 .
Adjust height of window (2), tighten down screws (1) and nut.
Center setting (C) and (D):
Turn screws (2) and (3) with special tool 41 6 120 to adjust
center setting of window (1) and tighten down nuts (2) and (3).
Pretension (E) of window inclination:
Window (2) must run into convertible top seal when convertible
top is closed.
With convertible top open, window glass must rest firmly against
window seal.
Turn screw with special tool 41 6 120 to adjust pretension.
Tighten nut.
RA Adjusting rear left or right side windows
BMW AG - TIS
16.02.2013 17:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -