bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing_replacing Side Trim Panel, Footwell, On A-pillar, Left > < 4 RA Removing And Installing_replacing Complete Cover For Linkage Aperture On Left Or
Page 1
background image

51 43 063

Removing and installing/replacing upper
section of armrest, rear left or right
(convertible)

Note:

The upper section shown in the illustration is only for viewing
purposes and is not identical to the actual upper section in the
vehicle.

Place a clean cleaning cloth between special tool 00 9 318 and
armrest (risk of damage).

Lever out upper section (1) at front with special tool 00 9 318
(universal wedge) towards top.

Unclip rest of upper section (1) towards top.

Installation:

Plastic pins (1) of upper section (2) must not be damaged.

Installation:

During removal, clips (1) can be pulled out with the upper
section.

If necessary, replace faulty clips (1) on armrest (2).

All clips (1) must be located in fixtures of armrest (2).

RA  Removing and installing/replacing upper section of armrest, rear left or right (

BMW AG - TIS

16.02.2013  17:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Removing And Installing_replacing Side Trim Panel, Footwell, On A-pillar, Left > < 4 RA Removing And Installing_replacing Complete Cover For Linkage Aperture On Left Or