3 Series E46 M3 (S54) CONVER
Lever out cover (1) with screwdriver.
Installation:
Before fitting kinematic assembly, apply a thin coating of grease to
contact surface.
Installation:
Engage return spring (1) before screwing kinematic assembly into
place.
Installation:
Rivet is replaced by a stud.
Nut must be screwed on on inside of backrest.
Lug (3) of kinematic assembly must be positioned next to
stop (2).
Screw on kinematic assembly.
Tightening torque: 52 10 20AZ
.
Check kinematic assembly for ease of movement.
RA Replacing backrest release cable for front left or right seat
BMW AG - TIS
16.02.2013 18:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -