3 Series E46 M3 (S54) CONVER
Installation:
-
Note reference (L or R) to vehicle side on locking lever (1)
and detent disc (2)
-
Note arrow (->) as reference to direction of travel
-
Lettering (L / R or ->) pointing upwards
-
Align locking pin (3) towards front
-
Fit fastener loosely only
-
Fit and align hard top
-
Screw down nut
RA Removing and installing/replacing fastener for hard top at rear/side left or rig
BMW AG - TIS
16.02.2013 18:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
