3 Series E46 M3 (S54) CONVER
54 31 110
Removing and installing/replacing rear rubber
seal
Release screws (in area 1) on left and right.
Remove seal.
Cut out cloth (1) from rubber seal (2) of rear window run
(scalpel).
Installation:
Stick cloth (1) into rubber seal (2) with superfast adhesive (refer
to BMW Parts Service).
Drill out rivets in window guide on C-pillar.
Remove window guide and remnants of rivets.
Feed seal out of rail of window run.
Installation:
Because of larger rail depth, attach a nut as adapter between rivet
and riveting pliers for riveting purposes.
Caution!
Risk of damage to door window or window guide: Make sure
there are no parts protruding from rivet. Riveting bolt must be
correctly torn off.
RA Removing and installing/replacing rear rubber seal
BMW AG - TIS
16.02.2013 18:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -