3 Series E46 M3 (S54) CONVER
Installation:
Replace screw (2).
Ensure deflection lever (1) to sensor for main pillar (3) is
correctly positioned.
Ensure screw (2) at top end of elongated hole of sensor for main
pillar (3) is correctly positioned.
Loosen screws (1).
Feed sensor for main pillar (3) with plate underneath in direction
of arrow out of convertible top frame (4).
Disconnect plug connection (2).
RA Removing and installing/replacing sensor for main pillar
BMW AG - TIS
16.02.2013 19:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
