3 Series E46 M3 (S54) COUPE
11 12 100
Removing and installing/sealing cylinder head
(S54)
Special tools required:
•
11 4 400
•
12 1 120
Remove both exhaust manifolds.
Remove intake filter housing with air-mass flow sensor.
Remove cylinder head cover.
Remove all spark plugs.
Remove intake air manifold.
Remove coolant drain plug in engine block. Drain and dispose of
coolant.
Installation:
Tightening torque, 11 11 5AZ.
Vent cooling system and check for leaks.
RA Removing and installing/sealing cylinder head (S54)
BMW AG - TIS
16.02.2013 12:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
