3 Series E90 316i (N43) SAL
Clip in oil line for lubricating inlet camshaft at retaining clips (see
arrows).
Insert banjo bolts (1) and tighten down.
Tightening torque: 11 12 11AZ
.
Mount both VANOS adjustment units.
Adjust valve timing.
Assemble engine.
RA Removing and installing/replacing inlet camshaft (N43B16)
BMW AG - TIS
17.01.2013 10:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -