3 Series E90 316i (N43) SAL
11 34 560
Replacing all valve stem seals - cylinder head
removed (N43B16)
Special tools required:
•
11 1 380
•
11 6 370
•
11 6 380
Necessary preliminary tasks:
•
Remove all valve springs.
Picture shows N46T.
Press special tool 11 6 370 onto valve stem seal.
Withdraw valve stem seal by turning and simultaneously
unscrewing special tool 11 6 370 .
Installation:
Lubricate valve stem with oil and insert valve.
Position special tool 11 1 380 (assembly grommets).
Coat new valve stem seal (1) with oil and install.
RA Replacing all valve stem seals - cylinder head removed (N43B16)
BMW AG - TIS
17.01.2013 10:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
