3 Series E90 316i (N43) SAL
11 36 655
Removing and installing/replacing both
solenoid valves (N43B16)
Necessary preliminary tasks:
•
Remove intake hood.
Unlock plug of solenoid valves (2 and 3) and disconnect.
Release screws (1).
Pull out solenoid valves.
Note:
The solenoid valve (2) controls the exhaust side adjustment unit.
The solenoid valve (3) controls the inlet side adjustment unit.
Installation:
Clean sealing surfaces (1) on cylinder head.
Installation:
Replace O-rings (1 and 2) on solenoid valve (3).
RA Removing and installing/replacing both solenoid valves (N43B16)
BMW AG - TIS
17.01.2013 10:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
