3 Series E90 316i (N45) SAL
61 12 200
Replacing wiring harness in left or right front
door
Necessary preliminary tasks:
•
Close front side window completely
•
Remove front door trim panel
•
Remove front acoustic insulation
Unlock plug connection (1) on door lock and disconnect.
Unlock plug connection (4) on power window and disconnect.
Disconnect plug connection (2) on outside door handle light.
Disconnect plug connection (5) on door mirror.
Unclip door wiring harness at points (3).
Installation:
Make sure door wiring harness is correctly laid.
Release screw (1), fold door wiring harness plug on A-pillar (2)
downwards slightly and remove.
Unlock plug connection behind and disconnect.
Pull rubber grommet (3) out of front door.
Feed out door wiring harness towards front to A-pillar and remove.
RA Replacing wiring harness in left or right front door
BMW AG - TIS
18.01.2013 14:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -