3 Series E90 316i (N45) SAL
63 21 183
Removing and installing/replacing left or right
tail light (on rear lid)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Partially remove trim panel for rear lid
Disconnect plug connection (1).
Unlock locking clip (2) in direction of arrow and remove socket
housing (3) from rear light (4).
Slacken nut (1) until clamping jaw (2) on rear lid (3) can be
unlatched.
Tightening torque 63 21 1AZ
.
Installation:
Make sure clamping jaw (2) is correctly seated on rear lid (3).
Fold rear light (4) outwards out of rear lid (3).
Remove rear light (4).
Installation:
RA Removing and installing/replacing left or right tail light (on rear lid)
BMW AG - TIS
18.01.2013 15:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
