3 Series E90 316i (N45T) SAL
11 13 000
Removing and installing, sealing or replacing
oil sump (N45T)
Necessary preliminary tasks:
•
Secure engine in installation position
•
Lower front axle
•
Drain off engine oil
•
Unlock and detach plug connection to oil level sensor
Unscrew cover plate (1).
Note:
A residual amount of oil remains in front section of oil sump. Have
a cleaning cloth and a suitable container ready.
Release bolts on oil sump.
Tightening torque 11 13 1AZ
.
Adjust rubber-coated metal gasket (1) to fit.
Picture shows N46T.
RA Removing and installing, sealing or replacing oil sump (N45T)
BMW AG - TIS
19.01.2013 01:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
