3 Series E90 316i (N45T) SAL
Necessary preliminary tasks:
•
Remove engine
•
Mount engine on assembly stand
•
Removing oil pan
•
Remove intake air manifold
•
Remove cylinder head
•
Remove exhaust manifold
In event of heavy oil carbon residue:
Carefully remove oil carbon residue from cylinder wall.
Important!
When removing and installing pistons, make sure the spray
nozzles (1) for piston cooling are not incorrectly adjusted
(risk of damage).
Release connecting rod bolts (1).
Tightening torque 11 24 1AZ.
Remove conrod bearing cap (2).
Installation:
Replace screws.
RA Removing and installing/replacing all pistons (N45T)
BMW AG - TIS
19.01.2013 01:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
