3 Series E90 316i (N45T) SAL
Tighten down screw (1) of exhaust adjustment unit.
Tightening torque 11 36 1AZ .
Tighten down screw (2) of inlet adjustment unit.
Tightening torque 11 36 1AZ .
Note:
The timing is correctly adjusted when special tool 11 7 252
rests flat on the cylinder head or protrudes by up to 0.5 mm to
the exhaust side.
Note:
The timing is correctly adjusted when special tool 11 7 251
rests flat on the cylinder head or protrudes by up to 1.0 mm to
the exhaust side.
Remove all special tools.
Assemble engine.
RA Removing and installing/replacing inlet and exhaust camshaft adjustment units (N
BMW AG - TIS
19.01.2013 01:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
