3 Series E90 316i (N45T) SAL
32 31 020
Removing and installing / replacing lower
section of steering column trim
Necessary preliminary tasks:
•
Remove upper section of steering column trim
•
Move steering column into "top" and "extended" position and
do not secure with adjusting lever
Press detent lugs outwards a litttle and unclip steering column trim
downwards.
Installation:
Align steering column trim by means of detent lugs to steering
column and press up as far as it will go.
Press steering column trim on both sides together a little and then
press upwards completely until detent lugs snap into place.
Check installation position, correct if necessary.
RA Removing and installing / replacing lower section of steering column trim
BMW AG - TIS
19.01.2013 02:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -