3 Series E90 316i (N45T) SAL
Detach prestamped positioning aid from backing.
-
Positioning aid "C4" rear door, left (below positioning aid "C5")
-
Positioning aid "D4" rear door, right (below positioning aid "D5")
Align positioning aid with printed help marking (X), opening and contact edge (2 and 3) to rear door and
positioning aid "C5" or "D5" and press.
Seal must rest on positioning edge (1) during sticking.
X
Start of bend radius
Y
Opening due to folding
Important!
-
Do not grip bonding surface.
-
It is not the length of pressing in time but rather the level
of pressing (approx. 10 ... 15 N/cm
2
) which is decisive
here.
-
Separation of seal after pressing destroys the adhesive
layer.
Note:
After being pressed on gently, seal can be pulled off again up to 3
times. Do not dirty adhesive area.
RA Removing and installing / replacing seal on rear door, left or right
BMW AG - TIS
19.01.2013 05:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -