3 Series E90 316i (N45T) SAL
61 31 382
Replacing coolant level switch
Warning!
Danger of scalding!
Carry out work only after engine has cooled down.
Important!
Do not damage connected water hoses.
Necessary preliminary tasks:
•
If necessary, release and raise coolant expansion tank
Note:
Operation is shown by way of example on the E85.
Disconnect plug connection (1).
Turn coolant level switch (2) in direction of arrow and pull
downwards out of coolant expansion tank (3).
RA Replacing coolant level switch
BMW AG - TIS
19.01.2013 06:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -