3 Series E90 316i (N45T) SAL
67 11 555
Removing and installing / replacing
servodrive for tank filler flap
Necessary preliminary tasks:
•
Remove top trim from tail panel
•
Partially remove luggage compartment wheel arch trim on
right
Feed out emergency actuation pull strap (1) in direction of arrow.
Fold acoustic insulation (2) forwards.
Disconnect plug connection (1).
Slacken screws (2)
Feed servodrive for fuel filler flap (3) in direction of arrow out of
retaining plate (4) and remove.
Installation:
Carry out adjustment of servodrive for tank filler flap (3) via both
elongated holes. It must be possible to lock or unlock the fuel filler
flap completely.
Turn sleeve (1) with a suitable tool (e.g.: pointed pliers) approx.
45
°
in direction of arrow and pull out of cover housing (2).
RA Removing and installing / replacing servodrive for tank filler flap
BMW AG - TIS
19.01.2013 08:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -