3 Series E90 318d (N47) SAL
Important!
Do not release screw (1).
Oil spray nozzles (2) must not be maladjusted or bent.
A bent oil spray nozzle cannot be adjusted and must be
replaced.
Important!
Position crankshaft vertically.
Proceed with care at the cylinder wall and oil spray nozzles
Risk of damage!
Undo big-end bearing bolts (1).
Remove big-end bearing caps (2) and set down in neat order.
Screw special tool 11 8 860 into large connecting rod eye.
Installation:
Pay attention to protective edge.
RA Removing and installing/replacing all pistons (N47, N47S)
BMW AG - TIS
20.01.2013 08:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
