3 Series E90 318d (N47) SAL
11 61 350
Removing and installing/replacing pressure
pipe on throttle valve assembly (N47, N47S)
Important!
In the event of a leak at the pressure pipe, there is a risk of
damage to the exhaust-gas turbocharger.
Necessary preliminary tasks:
•
Remove acoustic cover at front.
Disconnect plug connection (1) on intake temperature sensor.
Release lock (3) with a suitable tool.
Disconnect pressure pipe (2) from throttle valve actuator.
Note:
Lock (1) must snap into place in fixture (see arrow).
RA Removing and installing/replacing pressure pipe on throttle valve assembly (N47,
BMW AG - TIS
20.01.2013 08:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
