3 Series E90 318d (N47) SAL
12 42 500
Replacing battery positive lead (N47)
Read fault memory. Switch off ignition.
Observe safety instructions for handling vehicle battery.
Remove front splash guard.
Observe instructions for disconnecting and connecting battery.
Disconnect battery negative lead from battery and lay to one side.
Unhook cable duct from lower section of microfilter housing.
Remove cover cap.
Release nut (1).
Installation:
Tightening torque, 12 52 4AZ.
Remove battery positive lead from support point.
RA Replacing battery positive lead (N47)
BMW AG - TIS
20.01.2013 09:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
