3 Series E90 318d (N47) SAL
13 71 000
Removing and installing intake filter housing
(N47)
Necessary preliminary tasks:
•
Switch off ignition
Detach plug from air-mass sensor (1).
Release clamp on air intake hose and disconnect hose.
Release screws (3).
Release intake snorkel, then remove intake filter housing.
RA Removing and installing intake filter housing (N47)
BMW AG - TIS
20.01.2013 09:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -