3 Series E90 318d (N47) SAL
Block flywheel with special tool 11 9 260 .
Unfasten bolts and remove SAC clutch from flywheel.
Important!
Do not use a special tool to detach SAC clutch from flywheel.
Remove clutch plate (1) from flywheel.
Clean flywheel, check for wear and damage.
Replace damaged flywheel.
Check grooved ball bearing in crankshaft for ease of movement
and tightness and if necessary replace grooved ball bearing.
Important!
Always replace clutch plates fouled e.g. by oil, cleaning agent.
Check clutch plate for damage and friction rust in hub profile and
replace if necessary.
RA Removing and installing or replacing clutch (SAC 240)
BMW AG - TIS
20.01.2013 09:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
