3 Series E90 318d (N47) SAL
36 11 503
Resetting RDC (Tyre Pressure Control)
Note:
RDC monitors the tyre inflation pressure in the four wheels.
Each tyre incorporates an electronic wheel circuit, which
constantly monitors the tyre inflation pressure.
The system signals when the inflation pressure drops in one or
more tyres.
Resetting must be carried out in each case immediately after tyre
pressures have been corrected, after tyres/wheels have been
replaced and after repairs to the air spring system.
Version with iDrive:
-
Press controller to call up i menu
-
Select Settings and press controller
-
Select Car/Tyres and press controller
-
If necessary, switch to the top field. Turn controller until
Tyres: RDC is selected and press controller
-
Start engine but do not drive off
-
Select Confirm tyre pressure and press controller
-
Drive off. Initialization is completed during the journey
Version without iDrive:
-
Start engine but do not drive off
-
Touch direction indicator lever up or down until the
corresponding symbol and RESET appear
-
Press PC button to confirm selection of Run Flat Indicator
-
Press PC button for approx. 5 seconds until a check/tick
appears after RESET
-
Drive off. Initialization is completed during the journey
RA Resetting RDC (Tyre Pressure Control)
BMW AG - TIS
20.01.2013 11:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -