3 Series E90 318d (N47) SAL
Lever out heater/air conditioner operator unit (1) with special
tool 00 9 340 and pull.
Disconnect associated plug connections.
Remove heater/air conditioner operator unit (1) complete with
centre console switch cluster (2) and trim (3).
Replacement:
Carefully unclip operator unit trim (1) at inner retaining points (2)
only.
Important!
Risk of damage to operator unit (3)!
Carefully unclip operator unit trim (1) at outer retaining
points (2) only.
Remove trim (1) from operator unit (3).
Replacement:
Carry out programming/coding.
RA Removing and installing/replacing heater/air conditioner operator unit (version
BMW AG - TIS
20.01.2013 15:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -