3 Series E90 320d (M47T2) SAL
11 28 015
Removing and installing/replacing power
steering pump drive belt (M47TU)
Special tools required:
•
11 0 330
•
51 3 180
Necessary preliminary tasks:
•
Remove front underbody protection.
•
Remove electric fan (E87 only)
•
Mark the direction of rotation of the drive belt if it is to be
reused.
Press drive belt (1) towards front with special tool 51 3 180 .
Turn down drive belt (1) at central bolt in direction of arrow.
Position special tool 11 0 330 on vibration damper.
Place drive belt (1) on special tool 11 0 330 .
Draw drive belt (1) with special tool 11 0 330 onto vibration
damper in direction of arrow.
RA Removing and installing/replacing power steering pump drive belt (M47TU)
BMW AG - TIS
23.01.2013 06:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
