3 Series E90 320d (M47T2) SAL
Remove bearing caps and camshafts.
All bearing caps are marked.
Note:
Worn rockers may only be reused on the same grooves of the
camshaft.
Important!
These screws must "not" be removed.
Note:
E
Inlet camshaft
A
Exhaust camshaft
RA Replacing camshafts (M47T2)
BMW AG - TIS
23.01.2013 06:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
