3 Series E90 320d (M47T2) SAL
Replace sealing rings and coat with oil.
Fit main flow oil filter cover and tighten down.
Tightening torque 11 42 2AZ .
Important!
Small amounts of engine oil may emerge when the oil
pressure switch is removed. Have a cleaning cloth ready.
Disconnect plug connection and remove oil pressure switch.
Installation:
Replace sealing ring.
Tightening torque 12 61 1AZ
.
Install special tool 11 4 050 with sealing ring (1) in place of oil
pressure switch.
RA Checking engine oil pressure (M47TU / M47T2)
BMW AG - TIS
23.01.2013 07:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -